Multi-axis stepper motor drive, 1-4 axes
Integrated interface for National Instruments motion controllers
Drive option for 3A or 5A continuous current
Stepper motors
Integrated 500 Watt motor power supplies
Operates from 110 or 220 VAC
External enable loop
Many different cable options

MDM2200

The Primatics MDM2200 is a multi-axis stepper motor drive system with an integrated interface to any National Instruments motion controller. A single cable connects the MDM2200 to a NI card.

Performance Specs	MDM2200
Number of Motion Axes	1 to 4
Motor Compatibility	Stepper
Controller Compatibility	National Instruments 7244, 7344, 7352, 7354, 7356, 7358
Input Power (VAC)	110 VAC, 50/60 Hz. Option for 220 VAC
Motor Voltage (VDC)	24, 42 or 60
Continuous Output Power (Watts)	625
Peak Output Power (Watts)	1250
Dimensions (H x W x D) (mm)	85.7 x 304.8 x 368.3
Operating Temperature (deg C)	0 to 45
Storage Temperature (deg C)	0 to 75
Weight (kg)	8.5

Drive Options

The MDM2200 is a higher power alternative to the NI MID-765X, making it suitable for larger motors. It is available is 1, 2, 3 or 4 axis configurations, allowing the user to choose the exact number of axes required in the application.

Stepper Drives	D5	D6
Motor Compatibility	Stepper, 2 Phase
Continuous Current (A rms)	3	5
Peak Current (A)	4	7
Bus Voltage (VDC)	12 to 48	24 to 75
Chopping Frequency (kHz)	20
Minimum Current (A rms)	0.4
Micro Step Revolutions (µ-steps / step)	400 to 51,200 steps / rev for 1.8° motor
Max Step Frequency (MHz)	10

Connectors and Cables

The MDM2200 connects to any NI controller with a single SHC68-C68-S cable from National Instruments. All axis signal connections are made through a robust circular connector for each axis. Cable assemblies are available for use with any Primatics stepper motor stage as well as many third party components.

Enable Loop

An external ENABLE LOOP allows easy integration into a machine safety system.